System Configuration Wizard:
Recommendations
My System = Car
Stereo: Receiver + Separate Amplifier(s)
<<
GO BACK TO PREVIOUS QUESTION <<
Dakiom recommends you add Stabilizers
to the system in the following order of priority:
Note: Do not use Class D amplifiers that do not
employ conventional feedback circuitry.If the car
amplifier is of a BRIDGED AMPLIFIER configuration, make sure you connect the
xA203/xA103 Stabilizer Box so the output of each half of the bridge is
connected to a separate red wire of the xA203/xA103 and the black wire
must be connected to the common ground.
1. Attach (1) QA203/QA103
to the Amplifier Front Left/Right and Rear Left/Right Speaker Outputs.
2. Attach (1) QR203/QR103 to the
Receiver Front Left/Right and Rear Left/Right RCA Preamp Outputs.
You may instead use the
equivalent number of 2 channel stabilizers if necessary.
|
Refer to the How
to Install Page and Product Documentation for detailed installation
information.
Order
NOW!
Note: This Wizard covers a variety of
typical setups, but may not cover all situations. If you have any
questions feel free to Email us at: sales@dakiom.com.
Please provide us with details about what components are in your audio
system and we would be happy to make recommendations.
