1. Attach (1) A203/A103
to the Left/Right Speaker Outputs of the Power Amplifier.
2. Attach (1) R203/R103 to
the Left/Right RCA Outputs of the Audio Player.
3.
Attach (1) R203/R103 to the
Left/Right RCA Outputs of
the Active Preamp.
4. For potentially more sound
improvement, you can experiment with
attaching (1) R203/R103 to
the Left/Right RCA Tape (Record) Outputs
of the Preamp (to
stabilize the internal input stage of the Preamp).
Note: It is OK for the R203/R103 to
just hang off the back of the Preamp with no other cables
connected to it.
5. Up to (3) R203/R103
stabilizers can be replaced with a single HR203/HR103
(with Y-cables) for a more cost effective solution.
Note: Check that the reach
of the HR203/HR103 is sufficient for your system.
For a step even higher in
sound quality, use MR253 over R203 and MA253 over
A203. Also, applying our DIY
tweaks offers substantial improvement as well.
